Pacemaker Headers

6 Reese Street, Richmond SA 5033

Ph: 08 8352 6488, Fax: 08 8443 5131

Website: www.pacemaker.com.au

For over a quarter of a century, Pacemaker has been innovating, designing and manufacturing quality exhaust headers in Australia. Pacemaker was the first company to introduce mandrel-bending technology into the exhaust header market, forever changing the header industry landscape.

Today Pacemaker still draws upon its long tradition of innovation by introducing new technologies into the market place. In this time Pacemaker has been able to design and build one of Australias largest 4-into-1 and Tri-y catalogues.

In 1997 Pacemaker introduced its turbulence eliminating Pipe Over Cone technology. All Pacemaker headers are manufactured with the pipes flared and welded over the collector cone, so nothing protrudes inside the collector cone, therefore increasing exhaust gas flow and eliminating turbulence inside the exhaust header. The result is better gas flow and increased horsepower.

Even more recently Pacemaker has introduced a shot peen process over its entire range. This process, while used to remove scale oil and other debris from the product prior to painting, has an interesting side effect. During a shot peen blast, the surface area is expanded and fine cracks and sharp edges are smoothed over. This also helps to extend the life of the product even further. This method of shot peening is also used in the aviation industry as well as in the building of high performance engines.

Our modern workshop incorporates the very latest equipment available, including our aircraft quality computerised Benders with revolutionary, patented, vertebrate type mandrel, ensuring perfectly round bends, previously unavailable in Australia.

Additional Features include:
1) Precision Laser cut and machined thick flanges to eliminate leaking and warpage.
2) All headers are jig welded for guaranteed fitment and are checked prior to shipment.
3) Comprehensive fitting instructions with V8 sets together with hi-tensile header bolts.
4) Big bore pipes available for most popular V8 models.
5) Emission hook-ups provided where applicable.
6) Primary pipes fitted through the flanges.
7) Heat proof finish tested to 1270.
8) Secondary and outlet pipes fitted over primary and outlet cones.

At Pacemaker, we believe that the product should not only perform well but have a high quality finish too. Everything from the attention to detail of our designs to the clean appearance of our welding technique to the use of smoother mandrel bends and precision laser cut flanges all combine to help make Pacemaker headers one of the highest quality headers on the market today. And to set them off, Pacemaker headers are finished in a bright and attractive, specially developed blue heat proof coating that will last well into the headers life. There is more to the finish than meets the eye.

Pacemaker Headers also manufacture and supply exhaust systems and can provide ceramic coating for all of your exhaust requirements through Ceramic Coat Australia, a division of Pacemaker Headers.

Pacemaker Headers are supplied by all the leading exhaust shops across Australia and to find your local Pacemaker stockist please call the distributor covering the state in which you live. Our distributors are:

New South Wales
Pace Exhaust Distributors Contact : Adrian King
15A Stanton Road
Seven Hills NSW 2147
P: (02) 8825 5099
F: (02) 9838 7075

Victoria
Magnum Exhaust Contact : Noel, Ian, Graham, Karin
35 Marni St
Dandenong South VIC 3175
P: (03) 9706 6554
F: (03) 9706 6882

Queensland
Auswide Exhaust Distributor Contact : Dennis, Brad, Jan
461 Gympie Rd
Kedron QLD 4031
P: (07) 3350 4577
F: (07) 3359 1193

Western Australia
Autopace Distributors Contact : Barry
488 Thurso Rd
Myaree WA 6154
P: (08) 9317 2800
F: (08) 93172890

South Australia
Muffler Bits Contact : Frank, Malcolm, Trevor
20 Gumbowie Ave
Edwardstown SA 5039
P: (08) 8277 0133
F: (08) 8374 0327

Tasmania
Launceston Auto Spares Contact : Geoff
141 Wellington St
Launceston TAS 7256
P: (03) 6334 1014
F: (03) 6331 6458

In the future Pacemaker intends to draw upon its heritage and experience to introduce cutting edge technologies into our product range to remain one of Australias leading header manufacturers.

Direct Link: http://www.classiccargurus.com.au/Pacemaker_Headers

Home | Categories | Events | Articles | Car Clubs | About Us | Advertise | Search

Privacy Policy | Disclaimer | Featured Links | Subscribe | Contact | Sitemap

© 2007 Copyright www.classiccargurus.com.au A Classic Car Directory.